ASTM A270 S32100 Sanitary (Hygienic) Stainless Steel Tubing and Pipe

• After-sales Service: Technical/Sample/Quality
• Type: Seamless/Welded
• Technique: Hot-Rolled/Cold-Drawn
• Material: Carbon/Alloy/Stainless
• Surface Treatment: Black&Varnish Coating&3lpe&PE
• Usage: Boiler Pipe, Food/Beverage/Dairy Products, Chemical Industry
• Model NO.: S32100
• Section Shape: Round
• Materials: Stainless
• Standard: AISI/SAE/ASTM/DIN/BS/En
• Transport Package: as Required
• Specification: 10-850mm
• Origin: China
• Production Capacity: 30000tons/Year

Product Description

ASTM A270 Sanitary (Hygienic) Stainless Steel Tubing and Pipe

Fushun is one of reputed ASTM A270 Sanitary Tube supplier, we supply these after all quality parameters checks by experienced and good knowledge staff.We stocks a wide range of industry standard sizes of both seamless and welded stainless steel pipe. Our offered ASTM A270 Tubing in sizes up to and including 12 inch [300 mm] in outside diameter.
 

Introduce

These ASTM A270 austenitic stainless steel sanitary tube intended for use in the dairy and food industry and having special surface finishes. ASTM A270 sanitary stainless pipe usually refers to the small pipe diameters, normally from 1/2 inch to 2 1/2 inch, thickness from 0.049 inch (1.24mm) to 0.15 inch (3.81mm). The maximum outer diameter of ASTM A270 Pipe is 12 inches (201.8 mm). ASTM A270 Tubing wall thickness tolerance shall not vary more than 12.5%. ASTM A270 tube using inch pound as the standard unit of measure. Our stock of ASTM A270 Stainless Steel Seamless Tubes and ASTM A270 Welded Tubing primarily consists of the austenitic 304, 304L, 316 and 316L grade in annealed and pickled, 2B finish, bright annealed, mill finish and polished conditions.Our high quality steel tubes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers of ASTM A270 Stainless Steel Tubing and ASTM A270 Stainless Steel Welded Sanitary Tubing. 
 

ASTM A270 Sanitary stainless steel tubing specification

ASTM A270 sanitary (hygienic) stainless steel tubing is the standard specification for the welded seamless, and heavily cold worked welded austenitic and ferritic stainless steel sanitary tubing. It includes the stainless steel tube types in seamless and welded ERW, EFW. ASTM A270 sanitary tubing intended applied in the diary and food industry, bio processing equipment, and having special surface finish.
 

CHEMICAL COMPOSITION

Grade	UNS Design	Composition, %
		C	Mn	P	S	Si	Cr	Ni	Mb	Ti	Nb	N	Cu	Ce	B	Al
TP304	S30400	0.08	2	0.045	0.03	1	18.0-20	8.0-11	. . .	. . .	. . .	. . .	. . .	. . .
TP304L	S30403	0.035	2	0.045	0.03	1	18.0-20	8.0-13	. . .	. . .	. . .	. . .	. . .	. . .
TP316	S31600	0.08	2	0.045	0.03	1	16.0-18	10.0-14	2.00-3	. . .	. . .	. . .	. . .	. . .
TP316L	S31603	0.035	2	0.045	0.03	1	16.0-18	10.0-14	2.00-3	. . .	. . .	. . .	. . .	. . .
TP321	S32100	0.08	2	0.045	0.03	1	17.0-19	9.0-12	. . .	Ti 5 × (C+N) min, 0.70 max	. . .	0.1	. . .	. . .

 

Dimensional Tolerance

OD Size	Nominal wall	Outside Dia	Length	Wall
1/2″ (12.7)	0.065″ (1.65)	+/-0.005 (0.13)	+1/8″ (3.18)/-0	+/-10%
3/4″ (19.1)	0.065″ (1.65)	+/-0.005 (0.13)	+1/8″ (3.18)/-0	+/-10%
1″ (25.4)	0.065″ (1.65)	+/-0.005 (0.13)	+1/8″ (3.18)/-0	+/-10%
1-1/2″ (38.1)	0.065″ (1.65)	+/-0.008 (0.20)	+1/8″ (3.18)/-0	+/-10%
2″ (50.8)	0.065″ (1.65)	+/-0.008 (0.20)	+1/8″ (3.18)/-0	+/-10%
2-1/2″ (63.5)	0.065″ (1.65)	+/-0.010 (0.25)	+1/8″ (3.18)/-0	+/-10%
3″ (76.2)	0.065″ (1.65)	+/-0.010 (0.25)	+1/8″ (3.18)/-0	+/-10%
4″ (101.6)	0.083″ (2.11)	+/-0.015 (0.38)	+1/8″ (3.18)/-0	+/-10%
6″ (152.4)	0.109″ (2.77)	+/-0.030 (0.76)	+3/16″ (4.76)/-0	+/-10%
8″ (203.2)	0.109″ (2.77)	+/-0.030 (0.76)	+3/16″ (4.76)/-0	+/-10%

 

Quality and Mechanical Tests:

To assure the highest quality standards, the tubing is subjected to extensive testing and inspection programs that meet or exceed ASTM A270 A1016 A1016M test requirements. Testing includes reverse bend, reverse flattening, and flange tests. Eddy current testing is performed on 100% of the sanitary tube produced.
Heat Treatment (Annealing):
Inline hydrogen bright annealing to 1900°F (1040° C) minimum followed with a rapid quench.
Surface Finishes
Surface finish is 20 µ-in Ra (0.5 µm) ID maximum, 30 µ-in Ra (0.8 µm) OD maximum surface roughness measured per ASME ANSI B46.1 with the profilometer reading at 90 degrees to the lay. Other finishes available upon request.
Flattening Test
For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 lengths of pipe.
Markings
Bright annealed tubing is line-stenciled with OD, wall, ASTM specifications, size, grade, heat number, production date and time. OD polished tube is marked on one end of each tube with a removable label stating ASTM specification, manufacturer, grade and heat number. Continuous line stencil available on request.
Note:
Mill test certificates will be issued according to EN10204.3
All tubes shall be supplied as per applicable ASTM A270 /A270M Specification.
 

MARKS

At last, the mark should furnished in accordance with A 1016/A1016M, and specified in the order. Includes the sanitary stainless steel pipe manufactured in Seamless (SML), Welded (WLD) or heavily cold worked (HCW).
 

PACKAGE

Before delivery, all steel pipes should bundled well, and covered by paper, cloths. Or packed in box by manufacturer.
 

ADDITIONAL REQUIREMENTS

In case specified in the order, intergranular corrosion tests shall be performed by manufacturer on specimens representative of the as-shipped condition. Sanitary stainless steel pipe and tube shall be capable of passing corrosion tests in the as-shipped condition. For austenite alloy steel should meets the Practice E of the standard A262 , and for duplex alloy steels (S31803, S32205 and A32750) should meets experiment C of Test Methods A 923.
In case the ASTM A270 stainless steel pipe for pharmaceutical quality applications, it is more strict on the chemicals, strengths and size tolerances.
ASTM A270 covers grades of seamless, welded, and heavily cold worked austenitic and ferritic/austenitic stainless-steel sanitary tubing. Seamless tubes shall be manufactured by a process that does not involve welding at any stage. Welded tubes shall be made using an automated welding process with no addition of filler metal during the welding process. Heavily cold worked tubes shall be made by applying cold working of not less than 35% reduction of thickness of both wall and weld to a welded tube prior to the final anneal. No filler shall be used in making the weld.
All material shall be furnished in the heat-treated condition. A chemical analysis of either one length of flat-rolled stock or one tube shall be made for each heat. Each tube shall be subjected to mechanical tests like reverse flattening test, hydrostatic test or nondestructive electric test.
The following surface finishes may be specified: mill finish, mechanically polished surface finish, finish No. 80, finish No. 120, finish No. 180, finish No. 240, electropolished finish, and maximum roughness average surface finish. Longitudinally polished finish shall be performed on the inside surface only while a circumferential polished finish shall be done on either the inside surface, outside surface, or both.
ASTM A270 A270M sanitary tube is ideal for the dairy, food and beverage industries where the highest degree of purity and cleanliness is essential. It is certified to the requirements of ASTM A270, 3A standards and most user specifications.
We stock all sanitary tube sizes from 1/2" (12.7 mm) to 8" (203.2 mm) OD in 20 ft. standard lengths. Custom lengths and sizes are available upon request.
ASTM A270 A270M ASME SA270 Grades TP304L and TP316L available from stock. Other grades are available upon request.
Standard: ASTM A270.
Description Name: ASTM A270 Sanitary Stainless-steel tubing, Seamless Sanitary stainless tubes, Seamless Sanitary stainless pipes, Welded Sanitary stainless tubes, Welded Sanitary stainless pipes,
TP304L Sanitary stainless tubes, TP304L sanitary stainless pipes, TP316L Sanitary stainless tubes, TP316L Sanitary stainless pipes.