JIS G3429 Sth11 Seamless Steel Tube for High Pressure Gas Cylinders

• After-sales Service: Technical/Sample/Quality
• Type: Seamless
• Technique: Hot-Rolled+Cold-Drawn
• Material: Alloy Steel
• Surface Treatment: as Required
• Usage: Hydraulic/Automobile Pipe, Machinery Industry, Special Purpose
• Model NO.: STH11
• Section Shape: Round
• Cutting Service: Available
• Mtc: 3.1 or 3.2 Certificate
• Transport Package: Seaworthy Standard Package
• Specification: 30-850mm
• Trademark: SHUNFU
• Origin: China
• Production Capacity: 50000tons/Year

Product Description

JIS G3429 Seamless steel tubes for high pressure gas cylinders

 

Dimensions and dimensional tolerances

Dimensions

outside diameter: 40-500mm
wall thickness: 3-30mm

Dimensional tolerances

Tolerance on outside diameter :+/- 1%
Tolerance on wall thickness : +30 / -0%
Tolerance on eccentricity : 20 max %
Tolerance on length : +30 / -0 mm
 

Our advantage :

1. High Quality, Reasonable Price
2. Over 40 Years Experience
3. ISO NQA Certificated Factory
4. Worldwide shipping
5. Emergency Orders and Fast Delivery
 

Manufacturing method

The manufacturing method shall be as follows.
a) Tubes shall be manufactured by combination of the tube manufacturing method and the finishing method which are indicated. The symbol of manufacturing method shall be in accordance.
b) Tubes shall normally be as manufactured without heat treatment.
c) Tubes shall be furnished with plane ends, unless otherwise specified.
 

Chemical composition

Symbol of grade	C	Si	Mn	P	s	Ni	Cr	Mo
STH11	0.50 max.	0.10 to 0.35	1.80 max.	0.035 max.	0.035 max.	/	/	/
STH12	0.30 to 0.41	0.10 to 0.35	1.35 to 1.70	0.030 max.	0.030 max.	/	/	/
STH21	0.25 to 0.35	0.15 to 0.35	0.40 to 0.90	0.030 max.	0.030 max.	0.25 max	0.80 to 1.2	0.15 to 0.3
STH22	0.33 to 0.80	0.15 to 0.35	0.40 to 0.90	0.030 max.	0.030 max.	0.25 max	0.80 to 1.2	0.15 to 0.3
STH31	0.35 to 0.40	0.10 to 0.50	1.20 to 1.50	0.030 max.	0.030 max.	0.50 to 1.00	0.30 to 0.60	0.15 to 0.25

 

Appearance

Appearance shall be as follows.
a) Tubes shall be straight and shall have cut-ends square to the tube axis for practical purposes.
b) Both the internal and external surfaces of tubes shall be smoothly finished and free from defects detrimental to use.
c) The tubes may be repaired by grinding, machining or other method, provided that the wall thickness of the product after repair shall be within the range of wall thickness tolerance. However, repair by welding shall not be performed.
d) The surface of the repaired part shall be smooth along the contour of the tube.
 

Tests

Chemical analysis
Hydrostatic test and non-destructive test
Optional tests